What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 00:10

In schematic diagrams this is the symbol for a fuse:
what exactly is a ‘surge’ protector?
the problem then depends on "how fast does the fuse operate?".
Why are there so many girls and not enough boys to follow?
At least they know the answer if they wanted it.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
A circuit breaker is similar, but is resettable.
Upvotes:
Can the fuse protect the electronic devices from lightning instead of a surge protector.
First Sentence:
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
What happens psychologically to a man the first time he gets penetrated anally?
One
Now when you have a certain ac resistance, then a current flows in a loop.
But it can get overloaded, and no longer works.
2024–10–10[John johnson John Johnson ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Why hasn't Japan legalized same-sex marriage?
2024–10–14 [Omar Gharbi Omar Gharbi ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then asserts :
What are some cool confidence hacks?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
An AC voltage/ current source, and an ac inductive load.
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The third is lightning and “how it gets conducted into a home.”
It also is a device that limits the change in current flow.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
When British people write X after everything, are they being serious or trying not to be awkward?
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then describes Rainy Season and Lightning.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Horoscope for Thursday, June 12, 2025 - Chicago Sun-Times
At one ohm, the resistor has a maximum of 1 watt power.
nine
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What are some common historical misconceptions?
A fuse is a non-resetable over current circuit protector.
2024–10–16 [ OO OLAOYE OYEBODE ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
eight
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This device then solves the entire problem.
The other is “what does a “fuse” do?”
so, what happens?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
There are two important concepts here.
Barnstars:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This one hit behind the barn.
There are three different concepts here that are getting confused.
Edit 2024–10.
[old diagram got deleted by accident]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
a photo is worth a thousand words.
What is lightning?
These are simplified answers to the original question, and does not change anything I wrote above.
but this device (an Inductor) … impedes the rapid changes in the current.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
These devices are installed between the “hot” and “neutral” and protective ground.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It seems Mohan does not understand the difference between a comment and an Answer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but I think this circuit , shows a few more pieces.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is 'the assistant's answer'
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then describes the function of a fuse.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
For this case there are devices called Metal oxide varistors (MOV).
Because the load is inductive, the current lags the voltage.(by a bit).
This is where the MOV conducts again, and dissipated the energy.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
I post the exact comment here.